Embedded Modules

Sort By:  
AVR ISP Adaptor (module)
Accepts standard 10 pin female AVR cable.
Makes it easy to connect USVBASP AVR programmer to breadboard.
CH340 soldered on board (MODULE)
This IC converts USB protocol to RS232  serial interface

Baud rates from 300 bps to 2M bps
All modem signals are supported (RTS, DTR, DCD, RI, DSR and CTS)
Drivers available for all operating systems

Driver Links:

WINDOWS ( 98 , ME , 2000 , XP , Server 2003 , VISTA , Server 2008 , Server2012 ,Win7 , Win8 32,64 , Win8.1 , Win10)LINUX


ANDROID3.1 and higher
CJMCU-232H (module)
High Speed Multifunctional USB to JTAG UART/FIFO SPI/I2C Module For Arduino



This module is a high-speed and multifunction external USB memory, which can achieve USB to UART (RS232, RS422 or RS485), FIFO, FT1248, JATG, SPI, I2C and so on. The chip of this module is FT232H, it is a single channel USB to serial / parallel ports which has various configurations. It has entire USB protocol handled on the chip, so there is no USB specific firmware programming required.
With this chip, you can achieve USB 2.0 Hi-Speed and Full-Speed you want. This module can be used as an external memory and a converter forArduino, which is high-speed and multi-function.


  • It can achieve USB to various fast serial interfaces.
  • It can simplify CPU interface design due to its CPU-style FIFO interface mode.
  • Adjustable receive buffer timeout .
  • It is compatible Hi-speed and full-speed.


  • Hi-speed to UART/FIFO IC: 480Mb/s
  • Full speed: 12Mbits/Second
  • UART transfer data rata: 12Mbaud
  • USB to asynchronous 245 FIFO mode for transfer data rate: 8 Mbyte/Sec
  • USB to synchronous 245 parallel FIFO mode for transfers: 40 Mbytes/Sec
Out Of Stock
CP2102 USB 2.0 to TTL UART Module (module)
The Silicon Labs CP2102 USB-to-UART Bridge Controller provides USB connectivity while communicating via a simple serial protocol.

Suppoerted Operating Systems:

  • Windows 7/8/8.1/10 (v6.7.3)
  • Windows XP/Server 2003/Vista/7/8/8.1 (v6.7)
  • Windows 2K (v6.3a)
  • WinCE
  • Macintosh OSX (v4)
  • Linux
  • Android

Driver:  usb-to-uart-bridge-vcp-drivers
Out Of Stock
FT232RL USB 2 Serial DIL Breakout Module (module)

This is the FTDI FT232RL USB to serial IC mounted on a SSOP to DIL adapter board.

This is the most basic of breakout boards for the FT232RL chip. If you want to add this chip to a breadboard or a homebrew through-hole pcb then this is for you. 

Datasheet http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232R.pdf

Drivers: http://www.ftdichip.com/Drivers/VCP.htm

Out Of Stock
TM1804 RGB Module (MODULE)

Resources Interfacing code

                Simple TM1804 Datasheet.pdf
USB BreakOut Board (Module)
Supply +5V to your projects via the PC USB port (maximium current 500 mA)

Built in self resetable  fuse to protect the USB port of your PC from short circuit

Provides D+ and D- for easy USB interfacing to microcontrollers
Per Page      1 - 20 of 20
  • 1